Resawing Ornaments From Thick Stock An Alternative To Stack Cutting On The Scroll Saw

 

Resawing Ornaments From Thick Stock An Alternative To Stack Cutting

 

Resawing is a woodworking technique that involves cutting a piece of wood along its grain to create two or more thinner pieces. It is often used to create veneers or thinner pieces of wood for projects such as furniture making or ornamental work.

One alternative to stack cutting is to cut thick stock and resaw the cut piece to the desired thickness. Resawing can be more efficient and cost-effective, especially if you only need to cut a few pieces.

In the case of resawing ornaments from thick stock, the process involves cutting a single piece of wood into several thinner pieces that can then be sanded on a belt sander to remove undesired saw marks.

To successfully resaw ornaments from thick stock, it is essential to cut slowly and carefully to avoid damaging the saw blade, wood, or fingers. It may also be helpful to use a guide or jig to help keep the wood in place and prevent it from spinning as it is being cut.

While resawing ornaments from thick stock can be useful, it may only be suitable for some ornament designs, particularly those with round or curved shapes. In these cases, stack cutting or other methods may be more appropriate.

Overall, resawing ornaments from thick stock can be a valuable alternative to stack cutting, especially for those who only need to cut a few ornaments and are looking for a more efficient and cost-effective method. Just be sure to cut slowly and carefully, and use a guide or jig if needed to help keep the wood in place and prevent it from spinning.

#odinstoyfactory #handmade #woodtoys #madeinusa #madeinamerica