A-10 Thunderbolt II (aka Warthog) Wood Toy Airplane Build
My Granson has repeatedly asked for one of these for several weeks every time I see him. I made this one for him for Christmas. Originally I had not intended to make one of these because I don't like the size, and it the details are not correct, but my grandson is seven and probably will not notice. Drilling The Engine Nacelle For An A-10 Thunderbolt Wood Toy Airplane The first problem I had was drilling the center hole. The plans say to drill the hole 1-inch deep. It does not need to be that deep. I drilled half that far, and 1/4-inch would have been enough. I had trouble getting the hole centered using my drill press and a heavy vise. When the point of the bit first made contact with the end of the dowel, the end grain would cause the bit to shift slightly. Next time I will need to break out the lathe chuck The second problem I had was drilling the holes for the dowels in the Nacelle. I tried everything I could think of to drill the hole straight through...