Restocking Spiders From The Snazzy Spooks Collection

Wood Toy Spider Cutout On My EX21 Scroll Saw

 Buy A Spider 

Snazzy Spooks Collection

Today I made another batch of spiders. Using my Excalibur EX21 scroll saw with a Pegas #3R Modified Geometry blade, I cut these out. Throughout the process, I performed quality checks and discarded any defective spiders. This time, one of the five spiders was discarded.

The wood is pine. Before applying the pattern, I sanded it. I use Inkscape to create the patterns and print them on a laser printer. My adhesive of choice is 3M77, which lets the patterns stick directly to the wood. Removing the patterns is simple: I use mineral spirits, which leaves the wood surface undamaged—unlike blue painter's tape. After the patterns are applied, I cut the boards into smaller pieces with a miter saw, placing one spider per piece. While cutting the patterns apart is optional, I prefer working with smaller pieces and find rectangular cuts easier to handle later.

Once the adhesive is removed, the spiders are sanded again with a sanding mop, a belt sander, and a random-orbit sander.

 

#odinstoyfactory #handmade #woodtoys #madeinusa #madeinamerica

 

Miniature Birdhouse Ornament, Handmade from Reclaimed Hardwoods and Finished with A Blend Of Beeswax and Mineral Oil, Collectable 895440710

 

Miniature Birdhouse Ornament, Handmade from Reclaimed Hardwoods and Finished with A Blend Of Beeswax and Mineral Oil, Collectable

 

Buy Now

I made this miniature birdhouse Christmas tree ornament in my shop using traditional woodworking tools from reclaimed wood. I glued together small pieces of wood to create a block of wood large enough to compound cut the ornament in three dimensions using a scroll saw. The ornament is finished with a custom blend of mineral oils and waxes that I apply hot for deep penetration and durability. This ornament could become a family heirloom. There are many styles of birdhouse ornaments available in my shop. Follow the link to see more.

Collectible Birdhouse Ornaments

Approximate Size:
Height: 3 Inches / 76mm
Width: 1.25 Inches / 32mm
Depth: 1.25 Inches / 32mm

#odinstoyfactory #handmade #christmasdecor #madeinusa #madeinamerica

The Best Clamp for Scroll Sawing Compound Cuts

 My Etsy Shop

If you are a scroller, you know how frustrating it can be to have your workpiece move while cutting. Especially when it comes to scrolling compound cuts, the clamp you use can make all the difference in the world for the accuracy and precision of your cuts.

After trying various clamps, I discovered that the spring clamp is the best clamp for scroll sawing compound cuts. Not just any spring clamp, but one with a strong spring that can take up the slack as you cut. The larger spring clamps worked best as they stayed in place and aligned the parts.

One of the main advantages of using a spring clamp for scroll sawing is that it will not damage the blade if you accidentally hit the clamp. Many spring clamps are made of plastic composites. If you should hit one of these clamps with a scroll saw blade, the blade would not be damaged.

In conclusion, if you are looking for the best clamp for scroll sawing compound cuts, consider using a spring clamp with a strong spring. Use larger clamps to keep your workpiece in place and aligned. Using the right clamp, you can take your scroll sawing skills to the next level and achieve more accurate and precise cuts.

Shop Photos - Reindeer Herd, Set of Three, for Christmas Decoration or Toys, Handmade Unfinished Unpainted Select Grade Hardwood Animals

 

Buy Now:  https://www.etsy.com/listing/917935014/

More Christmas Decor: https://www.etsy.com/shop/odinstoyfactory?section_id=27235904

YouTube: https://youtu.be/vlUOC833W3M

I made two new sets of these tiny reindeer last night. The antlers are challenging to cut and separate from the wood without breaking them. This time I managed to get them cut without breaking anything.

I used an Excalibur EX21 scrollsaw and Pegas Modified Geometry 3R blades. #3 blades cut slower, but I get a much smoother cut than I would get using a #5 blade. I could probably cut them faster without the reverse tooth blades. The wood used for this herd of reindeer is poplar I purchased from one of the big box stores.

I print the patterns on heavy paper with a laser printer and Inkscape. After cutting the patterns to size, glue them onto the wood using 3m 77 spray adhesive. The patterns are glued directly to the wood. There is no need to remove the patterns since they are on the waste wood. I must mount the patterns straight, or the reindeer will be distorted.

The total time to make these was about three hours. 

#odinstoyfactory #handmade #christmas #madeinusa #madeinameric

Miniature Birdhouse Ornament, Handmade from Reclaimed Hardwoods and Finished with Blend Of Beeswax and Mineral Oil, Collectable 896447106

 

Miniature Birdhouse Ornament, Handmade from Reclaimed Hardwoods and Finished with Blend Of Beeswax and Mineral Oil, Collectable

 

Buy Now

I handmade this miniature birdhouse Christmas tree ornament in my Toymaker's Shop from reclaimed wood. Decorate your tree or make a unique gift or stocking stuffer.

Approximate Size:
Height: 3 Inches / 76mm
Width: 1.25 Inches / 32mm
Depth: 1.25 Inches / 32mm

Other sizes and colors may be available via custom orders or in other listings in my shop.

I make items by hand from natural wood and wood products. They can differ from one piece to the next. The one you receive may differ from the item in the listing photos. Wood thickness may vary slightly from the stated size.

Not for children under 3 years old or kids who still chew things. If the toy breaks, small parts may present a choking hazard. Small children should not play with this toy without adult supervision.

Custom orders are always welcome in my shop. Don't hesitate to get in touch with me with your needs.

Handmade in Tallahassee, Florida, USA

#odinstoyfactory #handmade #woodtoys #madeinusa #madeinamerica