Odin's Toy Factory

Handmade Wood Toy Cars Hot Rod Freaky Fords Being Painted With Acrylic Baby Blue Paint Hot Rods https://www.etsy.com/shop/odinstoyfactory?search_query=Hot+Rod Toy Cars https://www.etsy.com/shop/odinstoyfactory?section_id=34638962 Toy Trucks https://www.etsy.com/shop/odinstoyfactory?section_id=34653279 Painting handmade wood toys can be a fun and creative way to add color and personality to your creations. While many types of paints exist, acrylic paints are often favored due to their versatility and ease of use. This blog post will discuss some tips and considerations when using acrylic paint to paint handmade wood toys, explicitly focusing on drying time vs. cure time. First, let's briefly review the difference between drying and cure times. Drying time refers to the amount of time it takes for the solvent in the paint (in the case of acrylics, water) to evaporate, leaving behind a dry paint film. Curing and drying are usually measured in hours or days and vary depending on facto

Two of my Badger 155 Airbrushes Click on the photo to see some examples of my toys. I am not an expert on airbrushes or how to use them. I paint toys with them, and that is it. This post is just a jumble of some things I learned about airbrushes the hard way. I use airbrushes and spray acrylic paints, and shellac. Acrylics are no big deal for cleaning up. I use generic window cleaner to clean my equipment. It cost about $1 for half a gallon the last time I bought some. Shellac is more expensive to use, but the cleanup is simple, and if you don't get it all out, a bit of denatured alcohol will loosen it up. Shellac is very forgiving. Just don't spray it when the humidity is high. The alcohol will pull water out of the air. It would be best if you strained your paint and shellac. I use the Harbor Freight paint filters and those disposable droppers to strain the paint. If you don't strain the paint, you will get clogs. Depending on the paint you use, you may need some additiv

Bad Bob's Custom Motors I use a variety of paints from various sources. I like the acrylic house paints the best. All of the paints are nontoxic when cured.  I like to use a white primer to seal the wood and make the colors pop. In this case, I am using Zinsser B-I-N shellac based primer.  I prefer to use an airbrush for painting toys but, I have to paint outdoors, and the weather where I live does not cooperate, and I have to wait or use a brush. I used an airbrush for these wooden toy cars. My airbrush is a Badger Anthem 155.  I prefer acrylics over all other paints. They clean up easily, cover well, and are readily available in a vast array of colors. To clean, I flood with water to get rid of the bulk of the paint. The remaining paint is easily removed with ammonia-based cleaners such as window cleaner. I use household$ ammonia to remove dried paint.  I used the following to paint these wooden toy car bodies. Pink - Behr Acrylic House Paint Green - Apple Barrel Gl

Brush Painted Wooden Toy Car - Hot Rod Freaky Ford - 32 Deuce Coupe - MDF - Blue - Black - Gold I tried an acrylic primer once. It was such a pain to sand that I never did it again. I've tried all sorts of methods for painting wood and MDF including using automotive primer filler I had left over. As far as I can tell it doesn't make any difference.  If I want to seal the material, I use shellac for the base coat. If I'm using a color that doesn't cover well I use white for the first coat or two. No matter what finish I use, I apply at least two layers of finish sanding between each layer.  The first seals and makes the fuzzies stiff so the sandpaper can smooth the surface. If I get an acceptable finish, I stop at the second coat. If not, I continue to paint and sand until I am satisfied with the result. I have tried just about every method I can find for applying finishes to my toys. The best I have used so far is spraying with an airbrush. I don't have a spra

It's not a simple choice when you intend to sell them or even give them away. You have to consider the age of the person the toy is designed for. There are several finishes to choose from when finishing wooden toys. Drying Oils Non-Drying Oils Polyurethane Shellac Paint There may be others, but these are the ones I have used. If I am making a toy intended for a child under three years old that puts everything in their mouth and likes to chew on things No finish at all is probably the best choice. These toys should be very simple and made from woods like hard maple. Although ti its used by many toymakers, I would not put any sort of oil on these toys. In my totally unscientific testing, I find that kids will almost always go for the painted toys. I have seen a few exceptions to this, but not many. Where the kids get to look at the toys, the painted toys may rule the day. If selling online adults are usually the shoppers. They seem to like to see the wood grain, but not