Testing My EX-21 Scroll Saw Aftter Aome Major Repairs
Christmas Tree Ornament Cut From Reclaimed Plywood Ornamentsi In My Shop: https://www.etsy.com/shop/odinstoyfactory?section_id=27235904 I recently had some significant problems with my scroll saw. I would up replacing the motor and the control board. The motor would randomly stop and finally quit for good. Leading up to this, it vibrated more and would break a #2 blade within seconds of starting the saw. I have been testing with #2 blade since the repair. These are cut from a piece of 1/8-inch thick reclaimed plywood I had on hand, with the idea that if they worked out OK, I would add them to my shop. That part could have worked out better. Looking closely at the photos, you can see several places where the veneer is coming off. And a few spots where the glue from the next layer is showing through. They are dipped in a 50/50 solution of clear shellac as an experiment to see how well this works.