Odin's Toy Factory

Handmade Wooden Toy Tow Truck Red Version Left Rear View Here is a red painted version of my previously posted shellac finished version of my tow truck.   It was played with by my grandson before the photos were taken.  Handmade Wooden Toy Tow Truck Red Version Right Side I made this version of the tow truck for my grandson. There are a few differences from the previous version. This one I painted red using Apple Barrel  "Bright Red" acrylic craft paint. I did not apply any primer or clear coat. The color was applied directly from the bottle with a brush. I have used this paint on many toys. It covers well, cures fast, and looks good by itself. Applying a clear top coat will make the color pop. This time I chose not to use the clear coat. Handmade Wooden Toy Tow Truck Red Version Right Front View I cut the body from a section of pine 2x4 using a scroll saw and a #5 skip tooth blade. The pattern is designed for cutting from 2x6 stock. I shrink the templat

Handmade Wooden Toy Tow Truck From the Quick N' Easy 5 Truck Fleet This version of the toy tow truck is made from a solid pine wood block. While it appears relatively simple. However, some of the parts are a bit tricky to pull off. Making the opening for the hook must be done before cutting the body from the wood. Care must be used to get it all aligned properly, or the hook will be off centered or crooked. Getting the window shape correct is essential. I could just drill a round hole, but that would change the entire look of the toy. I like to avoid round holes when possible. This version uses axle pins. I like the look of them on toy trucks. However, it is critical that the axle holes be drill parallel to the bottom edge of the body so all the wheels will sit level on the surface.  If you are using a handheld drill, you should use dowels for axels. When using dowels, there is a bit of wiggle room so if the holes are off just a tiny bit the wheels will still sit