Odin's Toy Factory

I have tried many kinds of primer and nothing works as well as a shellac based primer.  Zinsser B-I-N It seals the wood so nothing bleeds through and you clean up with alcohol. No super toxic fumes. It sprays and brushes well. I reapply the primer and sand until it feels smooth.   For lighter colors, yellow for example, you need to use a white base coat or primer. Zinsser B-I-N primer bright white. Ot makes the xolors pop. All of the white parts on this car are Zinsser B-I-N primer with a clear coat on top. Note how the white background of my photo tent looks grey by comparison. 20141213-165701 Handmade Wooden Toy Car Bad Bob's Custom Motors Coupe Blue & White 653434064 The primer needs to be sandable. You may need to try some primers.  The first primer I tried didn't sand well at all. Shellac isn't the most sandable finish around. If it gets to hot it can melt and gum up your sandpaper. This means hand sanding with light pressure only.  There are many ot

Bad Bob's Custom Motors I use a variety of paints from various sources. I like the acrylic house paints the best. All of the paints are nontoxic when cured.  I like to use a white primer to seal the wood and make the colors pop. In this case, I am using Zinsser B-I-N shellac based primer.  I prefer to use an airbrush for painting toys but, I have to paint outdoors, and the weather where I live does not cooperate, and I have to wait or use a brush. I used an airbrush for these wooden toy cars. My airbrush is a Badger Anthem 155.  I prefer acrylics over all other paints. They clean up easily, cover well, and are readily available in a vast array of colors. To clean, I flood with water to get rid of the bulk of the paint. The remaining paint is easily removed with ammonia-based cleaners such as window cleaner. I use household$ ammonia to remove dried paint.  I used the following to paint these wooden toy car bodies. Pink - Behr Acrylic House Paint Green - Apple Barrel Gl

Zinsser B-I-N White Shellac-Based Interior/Spot Exterior Primer and Sealer Is what I find works best. I originally purchased this to use for a white base to make the color pop. Previously I use white acrylic paint on top of shellac. It worked pretty good but using the shellac based primer I get a white base and sealer in one step. Shellac is compatible with just about any finish. It will seal pine knots. This primer is used for a sealer when repairing smoke damage after a fire. I just did a test on an MDF Play Pal minivan. One coat was all it took. I get it at  Home Depot in the paint department.  

Brush Painted Wooden Toy Car - Hot Rod Freaky Ford - 32 Deuce Coupe - MDF - Blue - Black - Gold I tried an acrylic primer once. It was such a pain to sand that I never did it again. I've tried all sorts of methods for painting wood and MDF including using automotive primer filler I had left over. As far as I can tell it doesn't make any difference.  If I want to seal the material, I use shellac for the base coat. If I'm using a color that doesn't cover well I use white for the first coat or two. No matter what finish I use, I apply at least two layers of finish sanding between each layer.  The first seals and makes the fuzzies stiff so the sandpaper can smooth the surface. If I get an acceptable finish, I stop at the second coat. If not, I continue to paint and sand until I am satisfied with the result. I have tried just about every method I can find for applying finishes to my toys. The best I have used so far is spraying with an airbrush. I don't have a spra