Scroll Saw Patterns for a Fat Fendered Freaky Ford Attached With Blue Tape
Scroll Saw Patterns for a Fat Fendered Freaky Ford Attached With Blue Tape

 

I try every method of attaching patterns that I find.

I use shelf liner for larger projects or where I need to see through it to avoid some defect in the wood. Otherwise, it sits on the shelf because I find it to be a pain to use.

Gluing the pattern directly on the wood and removing it with mineral spirits works well, except that the adhesive gets into the wood, and there is no way to get it out. It can take a day or two for the mineral spirits to evaporate from the wood. I can't do anything with the piece until it's done. I use this method for delicate pieces where the extra time and the adhesive residue aren't a problem.

Clear packing tape I don't like to use. I find the shiny surface to be annoying, and I have issues with it lifting. I used a lot of it when I first began using paper patterns. I tried taping the wood patterns and applying the tape first, and gluing the pattern to it. Neither method was satisfactory. When I tape the pattern to the wood, the glare from the shiny tape was a problem. When gluing patterns to the tape, I found that adhesives do not stick to the smooth surface well. I use it for taping pieces together for compound cuts and sealing boxes for shipping.

Carbon paper and tracing are unpleasant to use and produce inferior results. I stopped using this method as soon as I had access to a scanner.

I like the idea of printing patterns on labels. I have purchased a box of labels for this but haven't tried it yet. I keep forgetting I have them.

Blue tape is by far my favorite method. It's fast, sticks well even in dusty environments. Blue tape does not leave any residue, and I find it easy to remove from most of my projects. When I use blue tape, I can sand, finish or glue the piece as soon as I rename the tape. The only downside I have found is that it will lift wood fibers from some pieces. It sticks too well. In these cases, I use the glue and mineral sprits method. As for the cost, Steve Good posted in a recent blog post that blue painter's tape was his favorite method, and he calculated that it cost him about $1.50 per month. I don't know what it costs me, but I know it takes a long time for me to use a six-pack of tape.

 

Comments

Popular posts from this blog

Handmade Wooden Dinosaur Pterodactyl Figurine Handmade and Finished From My Buddies Dinos Collection - 655979018

Wooden Toddlers Puzzle Black Kitten - A Simple Two Piece Tray Puzzle Handmade and Painted From My Puzzle Pals Collection - 645535259

Wooden Toy Lorry Truck My First Version Made For My Grandson - 705872553