In The Toymaker Shop - Fat Fendered Freaky Ford Torpedo

Handmade Wood Toy Car Torpedo Testing Wheel Fit
Handmade Wood Toy Car Torpedo Testing Wheel Fit

 

 This wood toy car is going together very nicely and I think it will go weel with the panel truck.


Handmade Wood Toy Car Torpedo Patterns Ready For Drilling
Handmade Wood Toy Car Torpedo Patterns Ready For Drilling


The patterns are attached to blue painter's tape with 3M77 spray adhesive. The pattern on the back piece above is for a jig to locate the fenders. I will save the jig for future use. Is it worth the trouble to make the jig for one car. Yes, absolutely. Trying to get the fenders aligned on both sides without a jig is difficult at best.


Handmade Wood Toy Car Torpedo Cutting The Body On A Scroll Saw
Handmade Wood Toy Car Torpedo  Cutting The Body On A Scroll Saw


I can cut this on my bandsaw, and it is much faster, but this is offset by the significantly increased amount of sanding I would need to do.


Handmade Wood Toy Car Torpedo Body Fresh Of The Fire
Handmade Wood Toy Car Torpedo Body Fresh Of The Fire

Handmade Wood Toy Car Torpedo All Of The Parts Are Cut Out And Ready To Sand
Handmade Wood Toy Car Torpedo All Of The Parts Are Cut Out And Ready To Sand


Handmade Wood Toy Car Torpedo Front Fender On A 1-Inch Belt Sander
Handmade Wood Toy Car Torpedo Front Fender On A 1-Inch Belt Sander

There is always some sanding to do. This is especially true when using softwoods.


Handmade Wood Toy Car Torpedo Fenders Glued And Clamped
Handmade Wood Toy Car Torpedo Fenders Glued And Clamped


Fenders are aligned and glued on using a jig. Using the jig assures the fenders are as close to the same on both sides as possible. It is much easier to do this way.




























Comments

Post a Comment

Popular posts from this blog

Handmade Wooden Dinosaur Pterodactyl Figurine Handmade and Finished From My Buddies Dinos Collection - 655979018

Image
Buy This Dinosaur Today My Buddies Dinosaur Collection All My Dinosaurs Welcome to my shop, where I handcrafted this unique Pterodactyl dinosaur figurine from carefully selected hardwoods using traditional woodworking tools. Approximate Dimensions: Length: 6-5/8 inches Height: 4 inches I use a custom blend of mineral oil, beeswax, and carnauba wax to give each figurine a smooth, durable, renewable, and natural finish that enhances the beauty of the wood. Because working with natural wood is unique, every dinosaur I create is one-of-a-kind. The item you receive may vary slightly from the one pictured in the photos, but that's the beauty of it. The natural variations in wood grain, color, and knots add to the character and charm of each piece, making it truly special. I take great pride in creating these handmade treasures in Tallahassee, Florida, USA. Don't hesitate to contact me if you have a specific wood preference or want a custom order. I'll do my best to accommodate yo
Read more

What kind of paint are you using for your Bad Bob's Custom Motors cars?

Image
Bad Bob's Custom Motors I use a variety of paints from various sources. I like the acrylic house paints the best. All of the paints are nontoxic when cured.  I like to use a white primer to seal the wood and make the colors pop. In this case, I am using Zinsser B-I-N shellac based primer.  I prefer to use an airbrush for painting toys but, I have to paint outdoors, and the weather where I live does not cooperate, and I have to wait or use a brush. I used an airbrush for these wooden toy cars. My airbrush is a Badger Anthem 155.  I prefer acrylics over all other paints. They clean up easily, cover well, and are readily available in a vast array of colors. To clean, I flood with water to get rid of the bulk of the paint. The remaining paint is easily removed with ammonia-based cleaners such as window cleaner. I use household$ ammonia to remove dried paint.  I used the following to paint these wooden toy car bodies. Pink - Behr Acrylic House Paint Green - Apple Barrel Gl
Read more

Testing Anita's Acrylic Craft Paint

Image
2017-05-08 18.20.48 - Wooden Toy - Play Pal - Trailer - Truck - Orange - Anita's - Acrylic - Craft - Paint I painted these two trailers with Anita's All Purpose Acrylic Craft Paint. I didn't use a primer or sealer coat of any kind. The paint was applied with a brush just as it came from the bottle. This is the first coat of paint. I was quite surprised at how well it covered the wood. The orange paints I have used in the past did not cover well at all.   Usually requiring multiple coats to get to the point where I could not see through it.  It raises the grain a lot but I expected this. Water based finishes of any kind will raise the grain. Etsy Store: http://OdinsToyFactory.com #WoodenToys #WoodToys #WoodenToyTruck #WoodToyTruck #OdinsToyFactory #Handmade
Read more